It turned out to be the contact between the brew level and the micro-switch in the back. It was to much in the front and it would always make contact.
On Tuesday, December 11, 2012 7:50:16 PM UTC+2, Ira wrote: > > At 11:07 PM 12/10/2012, you wrote: > >Hello! > > > >I just received my brand new Brewtus IV but it looks like it's a lemon. > >I plugged it in, turned the ON switch and the pump started > >immediately. It started sipping out water from the reservoir and it > >kept and it kept until I saw that the water is dripping from the > >bottom of the machine. > >When I saw that I turned it OFF. > >Called the supplier (it's in another country) who suggested to take > >the cover off and give them more details. > >I turned back the machine with the cover off and I saw the water is > >coming out from the bottom of the safety valve when I switched the > >ON/OFF switch. > > As I recall the first thing you need to do when receiving the machine > is to lift up the lever and let the brew boiler fill until water > starts coming out of the group. Did you do that? > > Ira > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To view this discussion on the web visit https://groups.google.com/d/msg/brewtus/-/KUj-g-RCxI0J. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
