I have not heard about problems with GFI causing any issues.

It does sound like you need a new brew boiler sensor. I would try that
first.

Todd
Whole Latte Love

On Fri, Mar 15, 2013 at 10:44 AM, <[email protected]> wrote:

>
> Things got a bit crazier. The PID continues to bounce around and sometimes
> goes up to 931 degrees celsius. The brew boiler in the unit won't heat at
> all although the steam boiler works just fine. I've been in contact with
> the dealer trying to figure things out. I even created a Youtube video for
> him to look at. Once he saw it, he asked me if the unit was plugged into a
> ground fault interrupt (GFI) plug. I told him it was. He told me that he
> had experienced other issues where an Expobar was plugged into a GFI and it
> caused the PID to malfunction, sometimes with permanent damage. He says
> this can be due to 'dirty power' coming from the GFI
>
> This may make sense as I unplugged the unit from a non-GFI plug and
> replugged it back into a GFI plug. He also had me remove the sensor from
> the brew boiler which I did. It had some mild scale on it which I wiped off
> with a rag. I tried again, this time on a non-GFI plug and it still did not
> work.
>
> It would seem the problem is either the sensor or the PID. I'm still in
> discussions with him to determine which is the best plan of action.
>
>
>  --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/brewtus?hl=en.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to