At the moment I am not using my Brewtus 2, due to recent illness and old age. I would like to start using it again and I am going to have to go through the learning curve again.

If your tap water has a hardness of 100, that is not bad. Of course 30 is better. I think by tap water hardness is about 150, and when I lived in Fairbanks, Alaska (for 45 years) it was about 250. I think if my tap water hardness was 100 I would not both with a softener and would deal with descaling when necessary. That would probably be several years.

Allen
On 4/18/2013 10:56 AM, [email protected] wrote:
Hi Allen,

You say you have a Brewtus 2 which suggests you've had it for at least a few years. I understood that if we don't do *something* with the water before it enters the machine, we will have lots of problems with scale causing some major performance issues. Perhaps you haven't had that which is very good for you.

BTW, I did some testing with a home aquarium kit and found the following:
Distilled Water (base test) - 0 parts per million on total hardness
tap water without the filter - 100 parts per million
water after going through the BestMax filter - 30 parts per million

This is a cartridge that needs replacing so that's not bad performance.


On Thursday, April 18, 2013 12:50:51 PM UTC-5, Allen wrote:

    I do not know. I do not use water softening and do not use the device
    that came with my Brewtus2.

    Allen
    On 4/18/2013 10:11 AM, [email protected] <javascript:> wrote:
    > Greetings,
    >
    > I posted this question on another site and although it got
    plenty of
    > views, not a single person offered their opinion. Perhaps this
    group
    > here is a bit more enthusiastic.
    >
    > I use a cartridge based Bestmax water filter/softener system for my
    > Expobar. It is supposed to remove hardness etc. that causes havoc
    > inside the machine. I'm at the stage where I will need to
    replace the
    > cartridge and they are not cheap. They are incredibly convenient
    but
    > not cheap.
    >
    > Of course there are also the salt based systems that do not need
    > replacement cartridges. They only need replacement salt which is
    > pretty cheap.
    >
    > What are the thoughts on the two systems? Is the salt system really
    > that much of a hassle to recharge? How often do they need to be
    > recharged? --
    > You received this message because you are subscribed to the Google
    > Groups "Brewtus" group.
    > To unsubscribe from this group and stop receiving emails from
    it, send
    > an email to [email protected] <javascript:>.
    > To post to this group, send email to [email protected]
    <javascript:>.
    > Visit this group at http://groups.google.com/group/brewtus?hl=en
    <http://groups.google.com/group/brewtus?hl=en>.
    > For more options, visit https://groups.google.com/groups/opt_out
    <https://groups.google.com/groups/opt_out>.
    >
    >

--
You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.



--
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to