Did you ever get this resolved?
 
You are not the first person to experience this problem.  I have had the 
same problem with my Brewtus 1.

On Friday, March 29, 2013 7:51:44 PM UTC-4, billherbst wrote:

> Given my history with this Brewtus, you might be right. This would be my 
> fourth OPV in four years. Last time, I bought two, just so I'd have a 
> backup the next time the OPV went loopy.
>
> I left out a couple of potentially significant facts in my first post. One 
> is that I changed grinders three days ago. My Baratza Vario had been 
> slipping on the coarse setting during grinds by one notch (in spite of 
> having the shim kit installed), so I finally swapped it out for my backup 
> grinder, an Ascaso i-Mini, which I've been gradually getting dialed in. The 
> first couple pulls were way too coarse, then one yesterday was way too fine 
> and choked the machine. Maybe the OPV had a stroke.
>
> The other fact is that two nights ago I backflushed the Brewtus for the 
> first time in almost a year. I just backflushed again about an hour ago, 
> and the pump does the same thing as when pulling a shot---preinfuses, then 
> goes to 9 bars and chokes, with that same decrease in pump noise. The only 
> difference is that the pressure doesn't fall from 9 to 2-3, since there's 
> nowhere for the pressure to go with a blind basket. I don't let it run that 
> way for more than a second before closing the pull lever. 
>
> So, I'm thinking what's going on might be different than I assumed. 
> Perhaps the pump is OK, in which case, as you say, the OPV might have 
> bought it when I backflushed four times times two nights ago. 
>
> I'll keep troubleshooting for a day or two before I swap out the pump-OPV 
> assembly.
>
> Thanks for responding.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to