The O-rings do tend to perish as they are on the top of the boiler and
get subjected to quite high temperatures so is just a matter of time.

My advice would be to change it if it is bothering you, is pretty
simple to do and get a spare one to keep for when that one goes :-)

Regards

JohnB

On Fri, Sep 27, 2013 at 1:35 PM, GambaMan <[email protected]> wrote:
> I opened it, it's the vacuum breaker.
> I gave it a tap and it's much better (thanks for the advice) but it still
> leaks very small droplets.
> Do you think this is normal or should I get the wrench to it and replace the
> o-ring?
>
> Gambaman.
>
>
> On Friday, September 27, 2013 11:24:15 AM UTC+2, sc00bs wrote:
>>
>> Probably a leaking vacuum release on the steam boiler. The release has an
>> o-ring in it that can either perish from the heat or sometimes get some
>> calcium on it causing it to leak. If mine starts hissing I usually just
>> remove the cover and give the pin sticking out at few taps with a wooden
>> spoon. It will shoot stream out so be careful but this usually serves to
>> dislodge any calcium build up if that is the problem. Otherwise let the
>> machine cool down, bleed off any stream pressure and dismantle it to check.
>>
>> Enjoy
>>
>> JohnB
>>
>> On 27 Sep 2013 9:49 AM, "GambaMan" <[email protected]> wrote:
>>>
>>> Hi there,
>>>
>>> I'm the proud new owner of a 2nd hand brewtus iii-v.
>>> There is periodically a gentle hissing sound coming from the top right of
>>> the machine inside.
>>>
>>> I am thinking of opening up the machine to have a look at what's causing
>>> it so decided to go to the file room and look at manuals etc.
>>>
>>> I'm getting an error message when I try to go there so cannot view files.
>>>
>>> Any help on hissing noises, files and manuals on home repairs is greatly
>>> appreciated!
>>>
>>> Gambaman.
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "Brewtus" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to [email protected].
>>> To post to this group, send email to [email protected].
>>>
>>> Visit this group at http://groups.google.com/group/brewtus.
>>> For more options, visit https://groups.google.com/groups/opt_out.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to