Bump? On Wednesday, July 30, 2014 2:40:24 PM UTC-7, Benjamin Piff wrote: > > Hi guys, > > I recently bought a Brewtus I that I suspected needed a new temperature > probe, and I had a spare of the model I replaced my old Brewtus II sensor > with. Are they the same sensor? Unfortunately it seems the heating element > of the steam boiler did not survive the trip (flipping the outlet mid > heating), so I followed another user's instruction and flipped two wires on > the pressurestat to trick it into heating the brew boiler. But weirdly, the > brew temp display is going higher than what I have set and eventually > showing "_ _". Does anyone know why the machine would heat too high, and > what I could do about it? > > People on this group replace their heating elements in the field, right? I > figure I'll just need to find the right size impact wrench and socket. > > Thanks a mil for your help guys, > > Ben >
-- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
