You sure you have the correct sensor for the B1? I think that they may take different sensors to the new machines with PID.
JohnB On Thu, Aug 14, 2014 at 6:09 AM, RQ <[email protected]> wrote: > Is the water condition hard? > You might want to check for scales. > > The sensors maybe blocked > > > On Thu, Aug 14, 2014 at 12:07 PM, Benjamin Piff <[email protected]> wrote: >> >> Bump? >> >> On Wednesday, July 30, 2014 2:40:24 PM UTC-7, Benjamin Piff wrote: >>> >>> Hi guys, >>> >>> I recently bought a Brewtus I that I suspected needed a new temperature >>> probe, and I had a spare of the model I replaced my old Brewtus II sensor >>> with. Are they the same sensor? Unfortunately it seems the heating element >>> of the steam boiler did not survive the trip (flipping the outlet mid >>> heating), so I followed another user's instruction and flipped two wires on >>> the pressurestat to trick it into heating the brew boiler. But weirdly, the >>> brew temp display is going higher than what I have set and eventually >>> showing "_ _". Does anyone know why the machine would heat too high, and >>> what I could do about it? >>> >>> People on this group replace their heating elements in the field, right? >>> I figure I'll just need to find the right size impact wrench and socket. >>> >>> Thanks a mil for your help guys, >>> >>> Ben >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
