Is the water condition hard? You might want to check for scales. The sensors maybe blocked
On Thu, Aug 14, 2014 at 12:07 PM, Benjamin Piff <[email protected]> wrote: > Bump? > > On Wednesday, July 30, 2014 2:40:24 PM UTC-7, Benjamin Piff wrote: >> >> Hi guys, >> >> I recently bought a Brewtus I that I suspected needed a new temperature >> probe, and I had a spare of the model I replaced my old Brewtus II sensor >> with. Are they the same sensor? Unfortunately it seems the heating element >> of the steam boiler did not survive the trip (flipping the outlet mid >> heating), so I followed another user's instruction and flipped two wires on >> the pressurestat to trick it into heating the brew boiler. But weirdly, the >> brew temp display is going higher than what I have set and eventually >> showing "_ _". Does anyone know why the machine would heat too high, and >> what I could do about it? >> >> People on this group replace their heating elements in the field, right? >> I figure I'll just need to find the right size impact wrench and socket. >> >> Thanks a mil for your help guys, >> >> Ben >> > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
