Chris Coffee was kind enough to send me the adapter for the Jaeger, which is now installed. Checked pump pressure with group head gauge, running right at 9 bar while BII front gauge shows about 8.5 bar. BII steam gauge holds right at 1 bar, so will set to 1.2 - 1.4 before putting the cover back on.
Eric, first symptom was relief valve popping. Disassembled and found broken o-ring. Replaced o-ring, cleaned buildup off of valve stem, reassembled and valve still popped. Noticed pressure around 2 bar, so relief valve was properly operating. Replaced pressure stat with Jaeger, needed adapter for BII. Which brings us up to today :) Pulled 2 test shots which were just nasty bitter, likely due to the beans sitting in my grinder for 3 weeks now. Thanks Ben and Ira, and the guys at Chris Coffee....should be back in the game shortly. Steve On Saturday, April 25, 2015 at 8:48:09 PM UTC-4, Eric Christoffersen wrote: > > > Neat: I don't see how this is related to your recent replacement of vacuum > relief oring. > > Trouble comes in clusters? > > Anyone have an explanation? > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
