If corrosion was the problem, it would probably be on the upper mating surface, not the part that holds the O-ring. Clean that well.
I have O-rings still from my last purchase, ping me privately and I will be happy to send you one. It is the 007 in red silicone high temperature. Best, bmc Sent from my iPhone > On Apr 14, 2015, at 14:34, StevieG. <[email protected]> wrote: > > Hi folks, > > My 2005 BII recently started blowing steam out of this valve, and although it > has happened intermittently over the years, now it is a constant whenever the > machine is heated up. Attached is a pic of the stem, which has some > corrosion on it. > > The o-ring seems to be OK, do you think it could be caused by the corrosion? > > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > <Vacuum Stem.jpg> -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
