Thanks Todd. Is the wire that provides power the common, normally open, or normally closed? I'll grab a multimeter but if you know right off hand...I can be lazy... best, bmc
Sent from my apple IIe > On Jul 22, 2015, at 18:07, Todd Salzman <[email protected]> wrote: > > I would recommend, pulling the wire off pressure stat that supplies the > power to the pressure stat and see if it keep over heating. > If it turns off when you pull the wire you need a pressure stat. If it keep > heating you have another problem. > >> On Wed, Jul 22, 2015 at 6:21 PM, Benjamin McCafferty <[email protected]> >> wrote: >> Doing a little reading, seems pretty clear that my pressure stat has failed >> also. Quite a coincidence! Anyway, please send any other thoughts, but >> I'll order a new p-stat. It's been in there for at least five years; date >> of manufacture is 9/04 so it was on a shelf for at least 3 years before >> installation, maybe more. >> best, >> bmc >> >> Sent from my apple IIe >> >> > On Jul 22, 2015, at 14:44, Ben McCafferty <[email protected]> wrote: >> > >> > Ahem. "Steam boiler over pressure" >> > >> > Sent from my iPhone >> > >> >> On Jul 22, 2015, at 14:30, Ben McCafferty <[email protected]> wrote: >> >> >> >> Hi all, >> >> >> >> More parts arrived today. I have new elements in both boilers, new >> >> overtemperature switches on both boilers, new PID thermoprobe, new power >> >> switch. >> >> >> >> When I switch the unit on, everything looks good but the steam boiler >> >> continues heating on up to 2 bar, and then the overpressure relief begins >> >> to blow so I switch the unit off and release some pressure from the steam >> >> wand. I have turned my pressurestat (jaeger) all the way down and no >> >> change. Any further ideas to help me solve this lingering problem? >> >> >> >> Thanks all, >> >> Ben McC >> >> Sent from my iPhone >> >> >> >> -- >> >> You received this message because you are subscribed to the Google Groups >> >> "Brewtus" group. >> >> To unsubscribe from this group and stop receiving emails from it, send an >> >> email to [email protected]. >> >> To post to this group, send email to [email protected]. >> >> Visit this group at http://groups.google.com/group/brewtus. >> >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
