Saturday, September 12, 2015, 12:27:11 PM, you wrote:
| Thanks for the response! When you say to rebuild the grouphead, which parts exactly should I replace? The three valves alone are about $50, so I was hoping to pin point where the problem was specifically. I did read an old post about just replacing the seals so I'm curious whether I could just get away with that. |
Remind me monday and I'll see what my cost for the parts is. I get wholesale at the local espresso parts supplier and it's quite astonishing the markup some of the internet places get. If it's 10 years old you should probably replace everything but as I recall it's not that much money and it's certainly not difficult. You just need wrenches for the big nut on top and the big nut on the bottom. Tape before wrench helps prevent scratches. Luckily, I already owned the proper tools.
-- Ira --
You received this message because you are subscribed to the Google Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.
