OK, now I feel like an idiot. 

I had the thought this morning that I might disconnect the leads to the 
high-limit switch on the steam boiler and check it for continuity, or 
perhaps even see if the Brewtus would turn on with the leads disconnected 
and taped up (and not trip the wall outlet breaker). So, I went into the 
kitchen to do this and — to my utter chagrin — discovered that one of the 
wires to the pressurestat hadn't been reconnected. The NO (normally open) 
lead was sitting on top of the pressurestat, apparently grounding against 
the case. How could I possibly have forgotten to reconnect that wire??? 
(Murphy's Law, I guess...). I reconnected the wire and turned on the 
Brewtus. The steam boiler red light came right on, but the wall outlet 
ground fault breaker didn't trip. OK, problem #2 solved, now back to 
problem #1.

I stood in front of the machine as both boilers heated up. The steam boiler 
hit 1.3 bars and kept right on going, heading for 2.0 and a high-limit 
trip. Turning the pressurestat adjustment screw all the way in either 
direction had no effect at all on the runaway train, so it appears that the 
pressurestat is indeed broken. I assume that's what was indicated earlier 
when I checked the continuity. Both circuits (normally open and normally 
closed) had positive continuity, where I think one is supposed to be open 
(no continuity) and the other closed (continuity). Apparently, pressurestat 
has gone south and died. 

I've now ordered another Jaeger pressurestat from chriscoffee (which 
appears to be the only online source for the Jaeger), so now the wait 
begins for the part to arrive. Then I'll swap out the old dead pressurestat 
for the new one and — hopefully — be back in business.

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.

Reply via email to