Hi Ira - My meter is a cheapo Greenlee most appropriate for seeing if an outlet has power, probably didn't cost more than $30.
The Brewtus doesn't pop the GFI when the brew boiler is not connected, the reservoir pressure switch closed, and the power switch on. The pump runs, opened the hot water wand to refill the system, getting water and steam. Letting it heat up now. With the volt meter probes plugged into the brew boiler wires, I am getting around 28 volts until the steam boiler light goes out, and hear a switch close, then get 122v. Just by process of elimination, and without verifying a short to ground, does this isolate the brew boiler element as the culprit? Thanks all for your help! Steve -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
