Have you ever replaced the pid? I had an issue years ago when my temp
sensor went bad and I got the e1 error. I think the wire burned and was
intermittently shorting. Your problem could be there.

On Mon, Aug 22, 2016 at 2:54 PM, Stephen Gould <[email protected]>
wrote:

> Update – after being at 93 for few minutes, the GFI popped and the display
> is reading E1.
>
> Steve
>
> From: <[email protected]> on behalf of Benjamin McCafferty <
> [email protected]>
> Reply-To: <[email protected]>
> Date: Monday, August 22, 2016 at 2:48 PM
> To: <[email protected]>
> Subject: Re: Dead short?
>
> I suspected as much.  Gotta run for now, will think on it and look up the
> wiring diagram later.
> b
>
> On Aug 22, 2016, at 11:43, Stephen Gould <[email protected]> wrote:
>
> Hi guys,
>
> Ok, connected steam boiler wires to brew boiler – it did NOT pop the GFI,
> and is now coming up to temperature.
>
> So, looks like it is not the boiler element – what’s next to check?
>
> Steve
>
> From: <[email protected]> on behalf of <[email protected]>
> Reply-To: <[email protected]>
> Date: Monday, August 22, 2016 at 1:16 PM
> To: <[email protected]>
> Subject: Re: Dead short?
>
> I agree with Ben.
>
> Sent from my android device.
>
> -----Original Message-----
> From: Benjamin McCafferty <[email protected]>
> To: [email protected]
> Sent: Mon, 22 Aug 2016 1:06 PM
> Subject: Re: Dead short?
>
> So let’s try steam boiler wires to brew boiler, with brew wires
> disconnected and taped, and see what happens there. If that trips the gfi,
> I’d say you have your solution.
>
> b
>
> On Aug 22, 2016, at 10:02, Stephen Gould <[email protected]> wrote:
>
> Sorry guys - I did not connect the steam boiler wires to the brew boiler.
>
>  It was the brew boiler wires connected to the steam boiler that did not
> pop the GFI.
>
> My bad.
>
> Thanks,
> Steve
>
>
> On Aug 22, 2016, at 12:54 PM, Benjamin McCafferty <[email protected]>
> wrote:
>
> Wait a second—I thought you said this *did* pop the gfi. (What you said to
> Herman).
>
> Here’s what I think you’ve found, please correct if needed:
>
> With all normal wiring, gfi trips immediately when cold and turned on.
>
> With both boilers disconnected, gfi does not trip.
>
> With wiring reversed to opposite boilers, gfi trips.
>
> With brew wires connected to steam boiler, steam wires disconnected, gfi
> does not trip.
>
> With steam wires connected to brew boiler, brew wires disconnected, gfi
> trips.
>
> OK, that’s it—what you said to Herman below is directly opposite to my
> last statement, so please let us know.
>
> best,
> bmc
>
> On Aug 22, 2016, at 09:28, StevieG. <[email protected]> wrote:
>
> Hi Herman,
>
> I did that check, and it did not pop the GFI.  The pump ran, lights were
> on - this was with the steam boiler wires connected to the brew boiler.
>
> Thanks!
> Steve
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "Brewtus" group.
> To unsubscribe from this topic, visit https://groups.google.
> com/d/topic/brewtus/NvCLUH025_k/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "Brewtus" group.
> To unsubscribe from this topic, visit https://groups.google.
> com/d/topic/brewtus/NvCLUH025_k/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "Brewtus" group.
> To unsubscribe from this topic, visit https://groups.google.com/d/
> topic/brewtus/NvCLUH025_k/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.

Reply via email to