Yeah, the new one comes with a new nut, so fire away. Impact hammer? This is the other fun side of the NSF sealant...it's a lot like loctite red. b
Sent from my apple IIe > On Aug 22, 2016, at 14:44, Stephen Gould <[email protected]> wrote: > > Anybody know what wrench size the temp probe is? A 17mm open end fits but > loosely, and that thing is not budging. > > I suppose I could cut the wire and use a socket on a breaker bar? > > Steve > > From: <[email protected]> on behalf of Ben McCafferty > <[email protected]> > Reply-To: <[email protected]> > Date: Monday, August 22, 2016 at 5:30 PM > To: <[email protected]> > Subject: Re: Dead short? > > Go Herman! > bmc > > Sent from my iPhone > >> On Aug 22, 2016, at 14:24, herman dickens <[email protected]> wrote: >> >> I figured that was part, or all, of your problem. Those probes and their >> wiring don't last forever. If I were you I would get the pid rather than >> replacing the controller but you can probably just replace the temp probe. I >> think I still have the temp probe and controller from mine if you get in a >> jam and can't get parts. Mine was working fine when I installed the pid. >> >>> On Mon, Aug 22, 2016 at 5:17 PM, StevieG. <[email protected]> wrote: >>> Here is what I found, the temp probe wires are cracked going into the well. >>> >>> Hopefully the picture is visible. >>> >>> All my other wiring looks to be OK, with no browned or burnt connectors. >>> >>> Thanks, >>> Steve >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Brewtus" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at https://groups.google.com/group/brewtus. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the Google > Groups "Brewtus" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/brewtus/NvCLUH025_k/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
