I figured that was part, or all, of your problem. Those probes and their wiring don't last forever. If I were you I would get the pid rather than replacing the controller but you can probably just replace the temp probe. I think I still have the temp probe and controller from mine if you get in a jam and can't get parts. Mine was working fine when I installed the pid.
On Mon, Aug 22, 2016 at 5:17 PM, StevieG. <[email protected]> wrote: > Here is what I found, the temp probe wires are cracked going into the well. > > Hopefully the picture is visible. > > All my other wiring looks to be OK, with no browned or burnt connectors. > > Thanks, > Steve > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
