Hi there, I was wondering if anyone has any thoughts on some strange behaviour my Brewtus IV is showing. I have the vibe pump model and it's plumbed into the water line.
With a blind filter, I have the brew pressure set to 10.5 bar. Over the last few weeks, there would be a few seconds delay from activating the brew lever to when the pump started pumping. This grew to a 5-10 second delay. I opened her up and found one of the wires connectors was a bit loose. So I refastened the connector securely and that worked. For a while. Now when I activate the brew lever, the pump activates straight away but it sits at 4-5 bar for a good 10-15 seconds before ramping up to 10-11 bar. I end up with half a shot extracted before it hits full pressure. Taste is obviously affected. Any thoughts where to start looking or diagnosing? Many thanks in advance! Ben -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
