I took it off and apart and cleaned it and replaced it. It's now heating up. BTW when I tilted the machine to keep sealant debris from getting into the boiler, a small screw fell out. It appeared to fit in a screw hole in the hot water tank and so I screwed it into the hole. I attach a picture with my finger pointing at it. Is that correct?
Sent from my iPhone > On Apr 28, 2017, at 14:29, Ira <[email protected]> wrote: > > Hello Howard, > > Friday, April 28, 2017, 11:04:22 AM, you wrote: > > > Help! I removed the case to observe what was happening when it was warming up > and I saw that water is spurting out of the “non-suction valve.” Now what do > I do? > > Take it off and clean or replace. > > -- Ira > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
