Hmmm, not sure then. Probably not needed on brew because the water level probe in steam is what shorts to stop it filling. Not home to look, sorry, but I believe there is only one ground wire to such a screw. Best, bmc
Sent from my iPhone > On Apr 28, 2017, at 12:25 PM, Howard Griffin <[email protected]> wrote: > > I see a green and yellow wire that is attached to a similar screw on the > steam (back) boiler, but no such wire for the front boiler. > > Sent from my iPhone > >> On Apr 28, 2017, at 15:12, Ben McCafferty <[email protected]> wrote: >> >> That's a ground screw and should have a wire to it; green and yellow if >> memory serves. >> b >> >> Sent from my iPhone >> >>> On Apr 28, 2017, at 12:08 PM, Howard Griffin <[email protected]> >>> wrote: >>> >>> I took it off and apart and cleaned it and replaced it. It's now heating >>> up. BTW when I tilted the machine to keep sealant debris from getting into >>> the boiler, a small screw fell out. It appeared to fit in a screw hole in >>> the hot water tank and so I screwed it into the hole. I attach a picture >>> with my finger pointing at it. Is that correct? >>> >>> Sent from my iPhone<image1.JPG> >>> >>>> On Apr 28, 2017, at 14:29, Ira <[email protected]> wrote: >>>> >>>> Hello Howard, >>>> >>>> Friday, April 28, 2017, 11:04:22 AM, you wrote: >>>> >>>> >>>> Help! I removed the case to observe what was happening when it was warming >>>> up and I saw that water is spurting out of the “non-suction valve.” Now >>>> what do I do? >>>> >>>> Take it off and clean or replace. >>>> >>>> -- Ira >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Brewtus" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at https://groups.google.com/group/brewtus. >>>> For more options, visit https://groups.google.com/d/optout. >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Brewtus" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at https://groups.google.com/group/brewtus. >>> For more options, visit https://groups.google.com/d/optout. >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
