I'd watch it for a few days. With normal plumbing (sink, shower, etc), it would seal as you used soap etc but with just water, I suspect it will get worse with time. Perhaps give the thin nut a bit more of a tweak and you may get lucky if it pulls into the tape you have there already. Glad you're making progress!! bmc Sent from my iPhone
> On Jul 2, 2017, at 14:19, Howard Griffin <[email protected]> wrote: > > I think I am 99% there. I sealed the threads and the two fittings that were > leaking before no longer leak. But there is a new tiny leak between the > solenoid valve and part #6, which I had taped but I guess not enough. Here is > a picture: you can see the drop of water sitting on the top of the valve. > Curiously, it does not seem to get bigger, and I am able to pull shots just > fine. > > Do you think this will be OK or do I need to get in there and fix it? > > <image001.jpg> > > From: [email protected] [mailto:[email protected]] On Behalf Of > Ben McCafferty > Sent: Sunday, July 02, 2017 12:16 PM > To: [email protected] > Subject: Re: Leaking fittings after replacing solenoid valve :-( > > My opinion remains the same as yesterday. Seal the threads and I think you'll > fix the problem. > b > > Sent from my iPhone > > On Jul 2, 2017, at 08:42, Howard Griffin <[email protected]> wrote: > > Here is where the leaks seem to be coming from: > > For the top fitting in the picture the drop emerges from between the jam bolt > and the silver T fitting. > > For the bottom fitting the drop emerges from between the jam bolt and the > brass fitting (not the silver T fitting). > > I don’t know if it’s pipe thread, gaskets or sealing surfaces. There aren’t > any gaskets at those fittings and I did not put any sealant or PTFE tape > there. > > > <image002.png> <image004.png><image005.jpg> > > From: [email protected] [mailto:[email protected]] On Behalf Of > Ira > Sent: Saturday, July 01, 2017 6:59 PM > To: Howard Griffin <[email protected]> > Subject: Re: Leaking fittings after replacing solenoid valve :-( > > Hello Howard, > > Saturday, July 1, 2017, 3:18:59 PM, you wrote: > > Here is a picture—the leaking is occurring where the blue arrowas are > pointing. > > Is it leaking at the threads or where the big nut smashes against the other > brass piece? > > Is it pipe thread, gaskets or sealing surfaces? > > -- Ira > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
