In other words, I think you can possibly get it to seal without the copper cone washer. b
> On Sep 8, 2017, at 12:14, Benjamin McCafferty <[email protected]> wrote: > > Looking at the adapter kit link he sent the other day, it appears that the > copper washer is shaped like a flare fitting. Perhaps they are too dissimilar > in size to take up the slack? I still think it might work, if he just shims > under the nut or shortens the nut, so that the compression fitting can do its > work. Did you try this winnipegger? Easy enough to try—just get some split > washers and put them on the tubing, then bolt it up and see what happens. > > best, > > bmc >> On Sep 8, 2017, at 11:39, Ira <[email protected] <mailto:[email protected]>> >> wrote: >> >> Hello winnipegger65, >> >> Tuesday, September 5, 2017, 3:31:10 PM, you wrote: >> >> >> So here's where I am. The little copper adapter/washer is gone. Much too >> mangled up to reuse. I'm not going to buy another full adapter kid from >> Chris Coffee just to get a 25 cent washer. >> >> Is it possible you put the copper washer in the wrong place? In my >> experience, that kind of fitting does not usually use a washer. >> >> -- Ira >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <mailto:[email protected]>. >> To post to this group, send email to [email protected] >> <mailto:[email protected]>. >> Visit this group at https://groups.google.com/group/brewtus >> <https://groups.google.com/group/brewtus>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To post to this group, send email to [email protected] > <mailto:[email protected]>. > Visit this group at https://groups.google.com/group/brewtus > <https://groups.google.com/group/brewtus>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
