I’ve tried disconnecting the water sensor with no result. The problem only 
occcures when the brew boiler reaches his set temp. At the start up the steam 
boiler fills perfect! 
I measured the voltage to the two way valve, thats 0 volts. So the problem 
could be the PID or the controller or the temp sensor of the brewboiler. 

Op vrijdag 24 november 2017 21:00:56 UTC+1 schreef BklynJim:
> The steam boiler started filling again the day after I ordered the part and 
> has been working fine for the last 3 weeks.  If it stop again, I'll try the 
> new probe.  If the boiler fills with the wire disconnected I think it's the 
> likely culprit.  Good luck! 
> 
> 
> On Fri, Nov 24, 2017 at 1:53 PM, Do Kooijman <[email protected]> wrote:
> Hi, I'm curious if you have solved the problem. My expobar Office leva PID 
> has the same problem.
> 
> 
> 
> 
> 
> 
> 
> Op zaterdag 4 november 2017 21:08:02 UTC+1 schreef BklynJim:
> 
> > Hey guys. Put in the new board and the steam boiler still doesn't fill. It 
> > does however, now fill if I remove the wire to the fill valve.  Ordered a 
> > new level probe from WLL.  Hope that does the trick.  
> 
> > This is the part.  LEVEL PROBE 1/4 BRASS 60100040
> 
> >
> 
> > On Saturday, October 28, 2017 at 12:00:09 PM UTC-4, BklynJim wrote:My steam 
> > boiler fills when the machine is cold but won't refill once warm.  I took 
> > the wire off the water level sensor and it still doesn't fill. Any ideas 
> > for what to check?
> 
> 
> 
> --
> 
> You received this message because you are subscribed to the Google Groups 
> "Brewtus" group.
> 
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> 
> To post to this group, send email to [email protected].
> 
> Visit this group at https://groups.google.com/group/brewtus.
> 
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.

Reply via email to