Could be a few things.
1. What does the PID display show? 2. Is the small light on the PID on steady? 3. Find the Static Relay and is that light on? 4. Check all the wires that go into the back of the PID and make sure they are properly secured. Take a look at this video, it may help: https://www.youtube.com/watch?v=UIiLeRdVWAU&t=939s Please let me know what you find. Todd Salzman Whole Latte Love On Fri, Mar 23, 2018 at 9:04 PM, Jonathan Stroum <[email protected]> wrote: > Hoping for some diagnostic intelligence from you more experienced Brewtus > folks. I grabbed Chris Bailey’s B2 last week for my brother-in-law and had > a chance to start the refurb process a few days ago. > > > > 1st problem ID’d was a dead pump. Ordered and installed today, I know > water has made it successfully to the steam boiler since it’s heating up, > producing big steam and the status light is coming on and off. > > > > 2nd problem was one of the Teflon hose that goes from the steam boiler to > the brew boiler was leaking. Replaced. > > > > 3rd problem is the brew boiler isn’t heating. I’ve measured 14.5 ohms > across the heater terminals and 0 ohms across either of the terminals and > the boiler. When detaching power from the heater and connecting my meter I > see about 18 volts. I’ve seen 120V intermittently but it’s not > reproduceable and apparently never gets delivered to the brew boiler. It > seems clear that something is telling the controller not send 120V to the > boiler. > > > > The setting on the stock controller is at 96C. > > > > The components I understand have a role in determining behavior are the > pressurestat, the heat sensors on each of the boilers. Is there a water > level sensor on the brew boiler? > > > > Anyone care to venture a guess or give me pointers on where to look next? > > > > Thanks much, > > JPaul > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
