It's hard to tell from the way you're describing it but it may be the
pressurestat. It it's the steam pressure that keeps rising rather than the
brew temp I'd say it's the pressurestat.

Herman

On Sat, Aug 11, 2018 at 12:25 AM Ben Stineman <ben.stine...@gmail.com>
wrote:

> We had an overpressure event this evening that ended up making the temp
> (as read on my non-original blue PID) go so far up that caused
> over-pressure and tripped the GFCI probably due to some water overflow. I
> turned it back on and I watched the pid climb in excess of 130ÂșC before I
> shut it off. Is this a bad PID again or is the temp probe/thermocouple bad?
> I replaced the PID a couple years ago already.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to brewtus+unsubscr...@googlegroups.com.
> To post to this group, send email to brewtus@googlegroups.com.
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to brewtus+unsubscr...@googlegroups.com.
To post to this group, send email to brewtus@googlegroups.com.
Visit this group at https://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.

Reply via email to