Yes, Brewtus Rotary with PID, not sure which version it is
On Sat, Nov 10, 2018 at 6:19 PM Louis Fourie <louis.four...@gmail.com> wrote: > That's interesting. I tried out the Monroc 4-hole tip, but did not have > success with that. Do you own a Brewtus? > > I shall certainly try to increase the steam pressure next week. > > > > Louis > > > > *From:* brewtus@googlegroups.com [mailto:brewtus@googlegroups.com] *On > Behalf Of *John Brinkman > *Sent:* Saturday, 10 November 2018 14:24 > *To:* Brewtus <brewtus@googlegroups.com> > *Subject:* Re: Wet steam from Brewtus IV > > > > Good luck > > > > I run my boiler at 1.4bar and have a 2000w (is 220V) element in it, runs > a 4 hole tip like a dream. > > I also switched lever steam control and switched the arm to a normal arm > and got rid of the cool touch one. > > > > Steams like a train :-), steams 250ml of milk in +- 30 seconds > > > > JohnB > > > > > > On Sat, Nov 10, 2018 at 2:14 PM Louis Fourie <louis.four...@gmail.com> > wrote: > > Hi John > > Thanks for your response. > > I have made sure the probe is to its maximum depth, but it makes no > difference. On another forum where I asked for advice someone suggested I > should increase the pressure in the steam boiler two or three clicks, which > should make it 1,4 or 1,5 Bar. I shall try that sometime, maybe later today. > > > > *From:* brewtus@googlegroups.com [mailto:brewtus@googlegroups.com] *On > Behalf Of *John Brinkman > *Sent:* Saturday, 10 November 2018 11:30 > *To:* Brewtus <brewtus@googlegroups.com> > *Subject:* Re: Wet steam from Brewtus IV > > > > I would try lowering the water level in the boiler, maybe the sensor moved > out slightly which would increase the water level. > > > > JohnB > > > > On Tue, Nov 6, 2018 at 5:28 PM <louis.four...@gmail.com> wrote: > > What could be the cause of the excessive wetness of the steam on such a > machine? The technical guy at the agents I purchased it from said it could > be that the sensor regulating water level in the steam kettle allows too > high a level of water in the kettle, but how can this came about when the > machine has been making good micro foam six months ago and has not been > tampered with in any way? When steaming into a vessel that has been heated > with boiling water, a lot of water appears in the vessel, even if I let go > a good, prolonged purging dose of steam first? > > > > The result is that milk would not foam properly as I have become used to > in the past almost two years since I bought the machine. I have tried > different brands of mile, all with the same dismal result. Even the brand > used with success by some coffee shops in the area where I stay. > > > > Any suggestions? > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Brewtus" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/brewtus/mnMZwGDVvik/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Brewtus" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/brewtus/mnMZwGDVvik/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To post to this group, send email to brewtus@googlegroups.com. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
