Do you have a PID? > My Brewtus II suddenly stopped heating up the brew boiler..
I opened it up and found that the left most wire going into the PID and leading to the brew boiler had slipped out of the PID. Pushed it back in and the brew boiler heated up. Important hints: take a photo of where each wire goes into the PID before you touch anything. Another wire might fall out. Note that there are set screws above where the wires go into the PID\. Turn the set screw clockwise to raise a tiny metal bar and lock the wire to the contact at the top of the PID slot where the wire goes. Finally, watch this WLL video trouble shooting the Brewtus electronics. this is how I found the loose wire. https://www.youtube.com/watch?v=UIiLeRdVWAU&t=254s -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/9ea17308-b41f-49ad-a238-1dc533a5fb14%40googlegroups.com.
