> If you bought an off the shelf AKO, it's set up for a refrigerator and the > heater will only turn on when it gets above the set point.
You were indeed correct. The AKO thought it was a fridge and not an espresso machine :P Up and running now! I think the new unit is acting a little bit strange though. I have changed the offset to better reflect the temperature at the brew head. I also changed the meny C1 to 1 degree celsius. The temperature on the display is shifting at 5 degree range now. I want it to be more precise. Do you have all the parameters Expobar use when they install the AKO unit? It's probably easier than me fooling around with the settings... Thank you for helping out :) /David On Sun, Sep 29, 2019 at 5:41 PM Ira <[email protected]> wrote: > > Hello David, > > Sunday, September 29, 2019, 12:20:38 AM, you wrote: > > > The brew boiler is heating up if I bypass the relay on my brand new AKO > > unit. > > Is there any stupid programming I have to do or do you think they sent > > me a faulty unit? > > If you bought an off the shelf AKO, it's set up for a refrigerator and the > heater will only turn on when it gets above the set point. You need to tell > it it's in an oven and then it will work correctly. You can test this by > lowering the set point to below room temperature and see if it turns on or > just find that setting on the instruction on the instruction sheet. It's > setting P0, it needs to be set to 1 for heat. If you don't have the manual. > let me know and I'll send it along. > > -- Ira > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/849412790.20190929084126%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM0ZN6C7YmsuRB9iZ4a4NQ3KJQ%3D5VGDe3u%3D2gHGk%3D2W5AGJNVA%40mail.gmail.com.
