Re: Brewtus II is not playing along.

[Ira]

Title: Re: Brewtus II is not playing along.

Hello David,

Sunday, September 29, 2019, 12:20:38 AM, you wrote:

> The brew boiler is heating up if I bypass the relay on my brand new AKO unit.
> Is there any stupid programming I have to do or do you think they sent
> me a faulty unit?

If you bought an off the shelf AKO, it's set up for a refrigerator and the heater will only turn on when it gets above the set point. You need to tell it it's in an oven and then it will work correctly. You can test this by lowering the set point to below room temperature and see if it turns on or just find that setting on the instruction on the instruction sheet. It's setting P0, it needs to be set to 1 for heat. If you don't have the manual. let me know and I'll send it along.

-- Ira

--
You received this message because you are subscribed to the Google Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/849412790.20190929084126%40gmail.com.