You are my hero 😀 This must be it! (The power on/off switch just broke but as soon as I get a new one I will try this)
On Sun, Sep 29, 2019, 17:41 Ira <[email protected]> wrote: > Hello David, > > Sunday, September 29, 2019, 12:20:38 AM, you wrote: > > > > > > *> The brew boiler is heating up if I bypass the relay on my brand new AKO > unit. > Is there any stupid programming I have to do or do you think they > sent > me a faulty unit? *If you bought an off the shelf AKO, it's set up > for a refrigerator and the heater will only turn on when it gets above the > set point. You need to tell it it's in an oven and then it will work > correctly. You can test this by lowering the set point to below room > temperature and see if it turns on or just find that setting on the > instruction on the instruction sheet. It's setting P0, it needs to be set > to 1 for heat. If you don't have the manual. let me know and I'll send it > along. > > -- Ira > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/849412790.20190929084126%40gmail.com > <https://groups.google.com/d/msgid/brewtus/849412790.20190929084126%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM0ZN6BsOpr8xgjmZDBDamNnj1Mt5Tgv4WQS3PrMMP4fLHtyEw%40mail.gmail.com.
