Strange Repair. I was about to replace the pump. I remember several people who replied that similar symptoms happen if the intake water tube was pinched and water flow to pump was restricted. I had checked that and did not see a problem.
I decided to replace the tube before I replaced the pump. Step 1 as a check, I disconnected the input water filter and pulled a shot. Same problem. I reconnected the water filter and pulled another shot. Problem FIXED!!!! Very strange. I pulled 2 more shots and it still worked normally. Start shot, brew pressure goes to 9.5 bar and stays there. Does anyone know why this would work? My only idea was that there was an air bubble that got fulshed out. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/a0c5f9ce-8998-4a97-bf88-edb169f41488%40googlegroups.com.
