good to hear you solved it! It's been a few days since - do you think the fix has been permanent at least up to this point?
On Wednesday, 22 January 2020 09:39:51 UTC-5, Richard wrote: > > The repair was temporary. After a few shots, the fluctuating brew pressure >> problem returned. >> > > The clue is that the problem was related to a restriction in input line. > I finally called WLL and they said that the fact that it went up to 9 bar > steady with blind portafilter suggested that pump was OK and the problem > might be in a restricted input. > They were still out of stock in the required tubing that should have been > included with the new pump kit that I had received. > > I ordered 4mm x 6 mm silicone tubing from Amazon. > $5 for 10 feet. > I replaced the input tubing to the pump. > PROBLEM SOLVED. > I tested by pulling 4 shots over 2 days. the brew pressure is now steady. > > Bonus: the Brewtus is now quiet all the time when not pulling shots. > > Another symptom of the restricted water input line was that the Brewtus > pump had been cycling on for a few seconds a few times an hour. > > It is quiet now. > > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/2ccbad10-ba48-4485-b6f2-9356c1e0da76%40googlegroups.com.
