I got a silicone o-ring kit 3Cvz8 and use the small one in that kit. It has worked for my brewtus and Gs3. I've been doing that for several years.
Herman On Wed, Sep 30, 2020 at 12:11 PM jjk3 <[email protected]> wrote: > I have been having a very difficult time finding the proper o-ring to > replace the one that is located in the OPV plunger (just below the notched > top of the plunger that you turn with a screwdriver to adjust the > pressure). Please see the pics below. > > I currently have a metric #4 (7 mm ID, 1.5 mm section) o-ring on it. It > fits better than the standard #3 (1/4" ID, 3/8" OD, 1/16 section) o-ring. I > also tried a #78 standard (1/4" ID, 7/16" OD, 3/32 section) o-ring - that > bulged out too much.. > > The metric #4 almost works - it leaks slightly. I can still run the > machine, but it will dribble out a small bit of water. A small enough > amount that I can continue to use it, but I obviously want to fix it. > > Anyone know if there is a part number for that o-ring or what size I need > to properly seal the OPV valve? > > Thanks for your help! > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/f59c21ac-4348-41a1-b82a-313b11da118fn%40googlegroups.com > <https://groups.google.com/d/msgid/brewtus/f59c21ac-4348-41a1-b82a-313b11da118fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM9mha0StectKWt0B7aT3b5gmW6Xf%2BwcTG6fZXKOG0sB9-edtg%40mail.gmail.com.
