Thanks, Herman. That is a kit with 36 different sizes, correct? Would you be able to tell me the exact size that you use? I have over 60 different o-ring sizes in my kits but cannot find a perfect match.
Thanks again! On Wednesday, September 30, 2020 at 12:16:00 PM UTC-4 [email protected] wrote: > I got a silicone o-ring kit 3Cvz8 and use the small one in that kit. It > has worked for my brewtus and Gs3. I've been doing that for several years. > > Herman > > > On Wed, Sep 30, 2020 at 12:11 PM jjk3 <[email protected]> wrote: > >> I have been having a very difficult time finding the proper o-ring to >> replace the one that is located in the OPV plunger (just below the notched >> top of the plunger that you turn with a screwdriver to adjust the >> pressure). Please see the pics below. >> >> I currently have a metric #4 (7 mm ID, 1.5 mm section) o-ring on it. It >> fits better than the standard #3 (1/4" ID, 3/8" OD, 1/16 section) o-ring. I >> also tried a #78 standard (1/4" ID, 7/16" OD, 3/32 section) o-ring - that >> bulged out too much.. >> >> The metric #4 almost works - it leaks slightly. I can still run the >> machine, but it will dribble out a small bit of water. A small enough >> amount that I can continue to use it, but I obviously want to fix it. >> >> Anyone know if there is a part number for that o-ring or what size I need >> to properly seal the OPV valve? >> >> Thanks for your help! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/brewtus/f59c21ac-4348-41a1-b82a-313b11da118fn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/brewtus/f59c21ac-4348-41a1-b82a-313b11da118fn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/bb3680d1-ec7d-4cb1-8af4-f0147da0ae23n%40googlegroups.com.
