I honestly don't remember. It's one of the smaller ones. My brewtus is in a second home and I have the Gs3 here. With both it seems that it might take a few hours for them to seat well without a slight hiss.
Herman On Wed, Sep 30, 2020 at 12:21 PM jjk3 <[email protected]> wrote: > Thanks, Herman. That is a kit with 36 different sizes, correct? Would you > be able to tell me the exact size that you use? I have over 60 different > o-ring sizes in my kits but cannot find a perfect match. > > Thanks again! > > On Wednesday, September 30, 2020 at 12:16:00 PM UTC-4 [email protected] > wrote: > >> I got a silicone o-ring kit 3Cvz8 and use the small one in that kit. It >> has worked for my brewtus and Gs3. I've been doing that for several years. >> >> Herman >> >> >> On Wed, Sep 30, 2020 at 12:11 PM jjk3 <[email protected]> wrote: >> >>> I have been having a very difficult time finding the proper o-ring to >>> replace the one that is located in the OPV plunger (just below the notched >>> top of the plunger that you turn with a screwdriver to adjust the >>> pressure). Please see the pics below. >>> >>> I currently have a metric #4 (7 mm ID, 1.5 mm section) o-ring on it. It >>> fits better than the standard #3 (1/4" ID, 3/8" OD, 1/16 section) o-ring. I >>> also tried a #78 standard (1/4" ID, 7/16" OD, 3/32 section) o-ring - that >>> bulged out too much.. >>> >>> The metric #4 almost works - it leaks slightly. I can still run the >>> machine, but it will dribble out a small bit of water. A small enough >>> amount that I can continue to use it, but I obviously want to fix it. >>> >>> Anyone know if there is a part number for that o-ring or what size I >>> need to properly seal the OPV valve? >>> >>> Thanks for your help! >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Brewtus" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/brewtus/f59c21ac-4348-41a1-b82a-313b11da118fn%40googlegroups.com >>> <https://groups.google.com/d/msgid/brewtus/f59c21ac-4348-41a1-b82a-313b11da118fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/bb3680d1-ec7d-4cb1-8af4-f0147da0ae23n%40googlegroups.com > <https://groups.google.com/d/msgid/brewtus/bb3680d1-ec7d-4cb1-8af4-f0147da0ae23n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM9mha1qWnTucXeKnWAy81tUrORSZqBMJJhvHgX5ywcRWZBofA%40mail.gmail.com.
