That’s sound thinking on Kevin’s behalf.

JP

> On Nov 24, 2021, at 4:30 PM, Kevin Maciunas <[email protected]> wrote:
> 
> On 24/11/21 2:36 pm, billherbst wrote:
>> Having replaced the pressure switch numerous times on both my old Brewtus II 
>> and now my Brewtus IV-R, I keep new replacements on hand. So, after letting 
>> the Brewtus cool down some, I swapped out the pressurestat in the machine 
>> and hooked up a new one. Easy-peasy, right? Wrong.
>> 
>> Turning the Brewtus on again, the steam pressure rose to 1.2 and just kept 
>> going. So, if the pressure switch isn't the problem, what is? Why is the 
>> heating element in the steam boiler not shutting off?
>> 
>> Having already had a problem last year with scale causing the refill valve 
>> to stick, I'm wondering if I have another malfunction due to hard water 
>> scale. Is that the likely culprit, or has something else failed?
> 
> OK - I'd suggest you have scale blocking the pressure path to the switch...  
> I'd put money on blockage on the U shaped tube that goes up to the switch.  
> If the pressure continues to go up, the controller and the rest of the 
> gubbins have nothing to do with it.  The pressure is 100% controlled by the 
> pstat.  A new one exhibiting the same behaviour tells me the fault lies on 
> the pressure sensing side - the tube.  You probably need to remove it and 
> see.  Blowing through would be reasonably diagnostic (although a flap of 
> scale COULD be there and not show, I guess...).  Where it attaches at the top 
> of the boiler is also in need of checking and I'd suspect it is the most 
> likely point of scale deposition (it's the hottest spot....).
> 
> You probably have 2 good pstats and machine with a scale problem would be my 
> most likely suggestion..
> 
> Cheers
> 
> /Kevin
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/brewtus/52ee81c7-5263-1f31-f7d2-3f66baacc82a%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/brewtus/45C67BED-21F6-4D17-A04C-3C33C810C080%40gmail.com.

Reply via email to