are the shots not pulling correctly or normally? do you think it's just the gauge that's failed, or are shots not pulling right and you think there's an actually pressure issue?
also - any other symptoms to narrow it down? e.g. water dripping out the overpressure valve, pid not reaching temp or taking a long time? any other changes with the water plumbing like adding a water filter, pressure drop elsewhere? On Sat, Jan 11, 2025, 10:25 AM peter riess <[email protected]> wrote: > Brewcrew, > > The gauge on my Brewtus IV has always been a bit off. When warm and idle > it reads about 3 bars. When pulling it reads about 8 then ramps to about > 10. I’ve not been too worried about the actual pressure because, based on > shot time and shot quality, it all seemed ok. Maybe I’ve been wrong the > whole time but recently the pressure has really dropped closer to 5-6 with > no ramp up during the pull. > > I guess it’s time to address the gauge and the pump, pressure stat, or > what ever is controlling the brew pressure. Any advice would be most > welcome! > > Best, > > Peter > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/d/msgid/brewtus/dd57d4b5-919d-424c-8d19-14d6a2346fdfn%40googlegroups.com > <https://groups.google.com/d/msgid/brewtus/dd57d4b5-919d-424c-8d19-14d6a2346fdfn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/brewtus/CAA-TRKrnNGN-eX%3DxQ-cLnWMNGoXRx1tvNo82GnAQCz2XmHUaMA%40mail.gmail.com.
