Samuel/Dave, All Braille works fine now, but sometimes, I get the message: Screen not in text mode. I then have to kill the process, and re-enter the command. Is there something I can do to prevent this message from displaying?
Thanks, David. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Samuel Thibault Sent: 19 June 2011 02:43 To: Informal discussion between users and developers of BRLTTY. Subject: Re: [BRLTTY] brltty - I'm confused! David Reynolds, le Sat 18 Jun 2011 17:43:39 +0100, a écrit : > When I type lsusb, I get a bus number and a device number, which shows that > my prolific adaptor is on bus 1 device 006. I then type: > Brltty -pm /dev/ttyUSB6 The x number in ttyUSBx has nothing to do with the USB device number. ttuUSBx are numbered starting from 0, i.e. if you have only one of them it'll be always ttyUSB0, whatever the USB device number. Samuel _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
