We have machining equipment that can machine your holes for you. I assume from note below, that you just need to enlarge the 0.500” holes to 0.750” holes (though holes). This is easy job to accomplish.
We are in Katy at 27027 Westheimer Parkway, suite 700, Katy, TX 77494. Just south of Katy Mills Mall. Give us a call at 281-382-8987, or my cell at 713-206-7802 tomorrow to discuss. > On May 1, 2017, at 6:57 PM, Rick Hiller via BVARC <[email protected]> wrote: > > Ok I'm an idiot. You want to enlarge the holes. Sorry. Misunderstood. > Never mind my offer. Again sorry! > > Sent from my i-Thingamajig > > On May 1, 2017, at 6:16 PM, rodney martinez via BVARC <[email protected] > <mailto:[email protected]>> wrote: > >> My bad....center punching is not necessary with a HALF INCH existing hole. >> Didnt read the minor details in the request. Anyway, call me and we can do >> it here. I have a 24 volt monster drill here. You hold one side, and I >> will hold the other. >> >> Rod >> >> >> On Monday, May 1, 2017 6:08 PM, rodney martinez via BVARC <[email protected] >> <mailto:[email protected]>> wrote: >> >> >> I have a heavy duty portable drill, and center punching. We can do it here >> in my garage in Meyerland. >> >> Helping out a fellow BVARC member tomorrow morning at 1100, but home after >> 1300 hours tomorrow afternoon. >> >> Rod Martinez >> KC5MZK >> 832-423-5640 >> >> >> On Monday, May 1, 2017 5:54 PM, Gary Sitton via BVARC <[email protected] >> <mailto:[email protected]>> wrote: >> >> >> Anyone know of anyone with the skills and tools to bore out four 1/2" holes >> in an aluminum plate to 3/4". I'm very willing to pay. I considered a >> step-bit or a straight drill but either is tricky, etc. This is for a base >> plate on an antenna mast. The material is 6061-T6. >> >> Gary, K5AMH >> >> Sent with AquaMail for Android >> http://www.aqua-mail.com <http://www.aqua-mail.com/> >> >> >> >> _______________________________________________ >> BVARC mailing list >> [email protected] <mailto:[email protected]> >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> >> Message delivered to [email protected] <mailto:[email protected]> >> >> >> _______________________________________________ >> BVARC mailing list >> [email protected] <mailto:[email protected]> >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> >> Message delivered to [email protected] <mailto:[email protected]> >> >> >> _______________________________________________ >> BVARC mailing list >> [email protected] <mailto:[email protected]> >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> >> Message delivered to [email protected] <mailto:[email protected]> > _______________________________________________ > BVARC mailing list > [email protected] <mailto:[email protected]> > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> > Message delivered to [email protected] <mailto:[email protected]>
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to [email protected]
