I will try the latest spandsp snapshot. BTW, the tcpdump does have everything. If you look at my sip.conf, you will see I changed the SIP port to 8000. This means you need to decode port 8000 as SIP when viewing the tcpdump file.
Frank On Jan 20, 2008 9:32 PM, Damjan Jovanovic <[EMAIL PROTECTED]> wrote: > > Use the latest snapshot of spandsp from > http://www.soft-switch.org/downloads/snapshots/spandsp/, it is currently > version 20080110. A number of bugs have been fixed since the version > you're using, 0.0.4pre16. Remember to recompile callweaver after > changing spandsp. > > Start the tcpdump before the fax starts and stop it after the call is > over. The one you sent is useless, there is no SIP in it at all. > > > On Sun, 2008-01-20 at 10:54 -0800, Frank Liu wrote: > > Here it is > > http://timepassindia.com/t38troubleshoot.zip > > > > On Jan 20, 2008 10:32 AM, CtRiX <[EMAIL PROTECTED]> wrote: > > > Frank Liu wrote: > > > > fax is failed. > > > > btw, I have spandsp-0.0.4-0.8.pre16 > > > > > > > > > > > See Trobleshooting at > > > http://www.callweaver.org/wiki/Faxing+With+CallWeaver > > > > > > Max > > > > > > > > > > > > > > > _______________________________________________ > > > Callweaver-dev mailing list > > > [email protected] > > > http://lists.callweaver.org/mailman/listinfo/callweaver-dev > > > > > _______________________________________________ > > Callweaver-dev mailing list > > [email protected] > > http://lists.callweaver.org/mailman/listinfo/callweaver-dev > > Damjan > > > > _______________________________________________ > Callweaver-dev mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-dev > _______________________________________________ Callweaver-dev mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-dev
