I am using 2:1, 22 and 44 tooth pullies. Already have them and modified them to work. What is wrong with the idler pulley? If it does not work out I will just have to redo the mounting plate to make it longer..
Thomas ----- Original Message ----- From: "turbulatordude" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, October 24, 2004 9:21 PM Subject: [CAD_CAM_EDM_DRO] Re: drive belt idler > > > --- In [EMAIL PROTECTED], "Thomas Powell" <[EMAIL PROTECTED]> > wrote: >> The motor plate is slotted and adjustable but only about 1/4". > There are >> two belts lengths close to what I need, 134 and 142 toothed. The > 134 is >> .45" too short and the 142 is .33" to long. I am going to get the > 142 and >> take up the slack with the idler pulley. I am using HTD 15 mm > belts. >> >> Thomas > > What would happen if you increased the pully dia to make the > difference ? > > and, btw, if you wanna use a 16 and a 72 pully combination, add the > idlers to wrap the pully around the small gear. > > Dave > > > > > > > > > > > Addresses: > FAQ: http://www.ktmarketing.com/faq.html > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ > Post Messages: [EMAIL PROTECTED] > > Subscribe: [EMAIL PROTECTED] > Unsubscribe: [EMAIL PROTECTED] > List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], > [EMAIL PROTECTED] > Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] > [Moderators] > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO > > OFF Topic POSTS: General Machining > If you wish to post on unlimited OT subjects goto: > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it > if you have trouble. > http://www.metalworking.com/news_servers.html > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a > sister site to the CCED group, as many of the same members are there, for > OT subjects, that are not allowed on the CCED list. > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ > bill > List Mom > List Owner > > > Yahoo! Groups Links > > > > > > > > Addresses: FAQ: http://www.ktmarketing.com/faq.html FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ Post Messages: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. http://www.metalworking.com/news_servers.html http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
