The motor plate is slotted and adjustable but only about 1/4". There are two belts lengths close to what I need, 134 and 142 toothed. The 134 is .45" too short and the 142 is .33" to long. I am going to get the 142 and take up the slack with the idler pulley. I am using HTD 15 mm belts.
Thomas ----- Original Message ----- From: "turbulatordude" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, October 24, 2004 8:34 PM Subject: [CAD_CAM_EDM_DRO] Re: drive belt idler > > Interesting. I mounted as stepper in such a way as to be on a plate > that had curved slots in it and used a 1/4 inch bolt as the hinge. > > If you are doing this on a rotary you are fine. But if you are doing > it by hand, those lines will look awfully out of alignment. > > From some printers I have idlers on bearings on a single plate, not a > square. Two holes, one slotted the other as the hinge. > > I didn't see a post indicating the belt size you were looking for ? > > Dave > > > > > > > > Addresses: > FAQ: http://www.ktmarketing.com/faq.html > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ > Post Messages: [EMAIL PROTECTED] > > Subscribe: [EMAIL PROTECTED] > Unsubscribe: [EMAIL PROTECTED] > List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], > [EMAIL PROTECTED] > Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] > [Moderators] > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO > > OFF Topic POSTS: General Machining > If you wish to post on unlimited OT subjects goto: > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it > if you have trouble. > http://www.metalworking.com/news_servers.html > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a > sister site to the CCED group, as many of the same members are there, for > OT subjects, that are not allowed on the CCED list. > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ > bill > List Mom > List Owner > > > Yahoo! Groups Links > > > > > > > > Addresses: FAQ: http://www.ktmarketing.com/faq.html FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ Post Messages: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. http://www.metalworking.com/news_servers.html http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
