Tom, Just do a search for cam followers at www.mcmaster.com and find the size cam follower, with the bearings to fit your need. Then, all you need to do is mill a slotted hole in the back plate, and bolt the cam follower stud in place.
Marv Frankel Los Angeles --- In [EMAIL PROTECTED], "Thomas Powell" <[EMAIL PROTECTED]> wrote: > I made the assumption (we all know what happens when one does that) that > timing belts could be ordered in any length when in actuality there are > "industry standards" in lengths. Sometimes with a several tooth jump in > length. > > With this assumption I made my mounting bracket for my servo motor. The > belts available in the adjustment range I have are either too small or too > long. I can redo the mount but don't particularily want to. I was thinking > of going with the longer belt and adding an idler pulley to take up the > slack and help keep the longish belt from possible vibration. > > Now the question. I can't seem to find a smallish idler pulley for a HTD > 15mm belt. I am looking for about a 1.5" dia pulley. Any ideas? > > Thanks, > > Thomas Addresses: FAQ: http://www.ktmarketing.com/faq.html FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ Post Messages: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. http://www.metalworking.com/news_servers.html http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
