Bruce Napier formulated on Wednesday :
> I'm about to replace my 5 litre accumulator tank in the fresh water
> system. The new one came pre-pressured to 5 bar. Since my ParMax 3
> cycles between 1.4 and 2.8 bar, I guess I need to reduce the tank
> pressure to something between those two values.
>
> Anyone got any advice about the optimum, or do I just do it by trial
> and error until I get an acceptable delay before the pump comes in?
>
between 2 and 2.25 bar should work OK
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/canals-list/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/canals-list/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[email protected]
mailto:[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
