Andrew Dyke wrote: > While I am at it, a drive belt went on the domestic > alternator the other day, fortunately I had a spare. I now > need to replace the spare. The local Halfords was less than > helpful so I thought I would try the WWW, without much > success. The following is written on the old belt:- optibelt > - VB s=cplus A 1350 Ld / 13 X 1320 Li A 52
Sounds like a standard A section V-belt ref A52 (i.e 52 inches). The 1350 and 1320 references refer to the pitch length and inside length (in mm). A replacement belt should be obtainable from your local engineering supplier (look for v belts in the yellow pages) or online e.g. http://www.bearingboys.co.uk/A52_V_Belt-130-p David Mack
