> Andrew Dyke wrote: > >> While I am at it, a drive belt went on the domestic >> alternator the other day, fortunately I had a spare. I now >> need to replace the spare. The local Halfords was less than >> helpful so I thought I would try the WWW, without much >> success. The following is written on the old belt:- optibelt >> - VB s=cplus A 1350 Ld / 13 X 1320 Li A 52 > From: "Mack, David" <[email protected]>
> Sounds like a standard A section V-belt ref A52 (i.e 52 inches). The > 1350 and 1320 references refer to the pitch length and inside length (in > mm). A replacement belt should be obtainable from your local > engineering supplier (look for v belts in the yellow pages) or online > e.g. http://www.bearingboys.co.uk/A52_V_Belt-130-p Hi David and All, Many thanks for the above info. Have just ordered one. Belt £3.68, shipping and VAT £4.58. Thanks to all others who responded. Regards, Andrew Web Site www.andrewdyke.co.uk Web Site www.mayorofevesham.co.uk
