Hi Katty, What signal are you using to drive the 'Data Valid' ports of the yellow adc blocks? Looking at the error message you got, my guess is that it's a simulink constant block with sample period of 0.25 --- would you mind checking that? A screenshot of your design would be helpful, too.
Best, Hong On Thu, Nov 22, 2012 at 3:20 PM, katherine viviana cortes urbina < [email protected]> wrote: > > Dear Casperites, > > > I'm compiling two spectrometers on the same design and I have the > following error: > > > gmake: *** [__xps/system_routed] Aborted > ERROR:EDK - > Error while running "gmake -f system.make bits". > Error using ==> gen_xps_files at 686 > XPS failed. > Warning: Matching "From" for "Goto" 'tut3_2spectrometer/Goto11' not found > Warning: The model 'tut3_2spectrometer' does not have continuous states, > hence Simulink is using the solver 'VariableStepDiscrete' instead of solver > 'ode45'. You can > disable this diagnostic by explicitly specifying a discrete solver in the > solver tab of the Configuration Parameters dialog, or by setting the > 'Automatic solver > parameter selection' diagnostic to 'none' in the Diagnostics tab of the > Configuration Parameters dialog > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_even' > is not connected. > Warning: Output port 1 of > 'tut3_2spectrometer/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd' > is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd' > is not connected. > Warning: Output port 1 of > 'tut3_2spectrometer/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out' > is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out' > is not connected. > Warning: Output port 4 of > 'tut3_2spectrometer/fft_wideband_real1/fft_direct' is not connected. > Warning: Output port 5 of > 'tut3_2spectrometer/fft_wideband_real1/fft_direct' is not connected. > Warning: Output port 4 of > 'tut3_2spectrometer/fft_wideband_real1/fft_direct/butterfly2_1' is not > connected. > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real1/fft_unscrambler/reorder' is not > connected. > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real2/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_even' > is not connected. > Warning: Output port 1 of > 'tut3_2spectrometer/fft_wideband_real2/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd' > is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real2/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd' > is not connected. > Warning: Output port 1 of > 'tut3_2spectrometer/fft_wideband_real2/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out' > is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real2/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out' > is not connected. > Warning: Output port 4 of > 'tut3_2spectrometer/fft_wideband_real2/fft_direct' is not connected. > Warning: Output port 5 of > 'tut3_2spectrometer/fft_wideband_real2/fft_direct' is not connected. > Warning: Output port 4 of > 'tut3_2spectrometer/fft_wideband_real2/fft_direct/butterfly2_1' is not > connected. > Warning: Output port 2 of > 'tut3_2spectrometer/fft_wideband_real2/fft_unscrambler/reorder' is not > connected. > Warning: Output port 1 of 'tut3_2spectrometer/pfb_fir_real/adder_1_2' is > not connected. > Warning: Output port 1 of 'tut3_2spectrometer/pfb_fir_real/adder_1_3' is > not connected. > Warning: Output port 1 of 'tut3_2spectrometer/pfb_fir_real/adder_1_4' is > not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/pfb_fir_real/pol1_in2_coeffs' is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/pfb_fir_real/pol1_in3_coeffs' is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/pfb_fir_real/pol1_in4_coeffs' is not connected. > Warning: Output port 1 of 'tut3_2spectrometer/pfb_fir_real1/adder_1_2' is > not connected. > Warning: Output port 1 of 'tut3_2spectrometer/pfb_fir_real1/adder_1_3' is > not connected. > Warning: Output port 1 of 'tut3_2spectrometer/pfb_fir_real1/adder_1_4' is > not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/pfb_fir_real1/pol1_in2_coeffs' is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/pfb_fir_real1/pol1_in3_coeffs' is not connected. > Warning: Output port 2 of > 'tut3_2spectrometer/pfb_fir_real1/pol1_in4_coeffs' is not connected. > Warning: Inconsistent sample times. Sample time ([0.25, 0]) of signal > driving input port 1 of > 'tut3_2spectrometer/adc/tut3_2spectrometer_adc_user_data_valid' differs > from the expected sample time ([1, 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([0.25, 0]) of signal > driving input port 1 of > 'tut3_2spectrometer/adc1/tut3_2spectrometer_adc1_user_data_valid' > differs from the expected sample time ([1, 0]) at this input port. > > > > If I go to the configuration of the ADC and ADC 1, this is the same > Sample period = 1, I tried to be different and I have the same error, > what should I do? > > see attechment > > Cheers > > Katty > >
