Hi Clifford, Happy New Year!
Thanks a lot for the BSP Package. I am going through the documentation now and have one SKARAB with casper firmware and one with Peralex. I would be interested to develop a Casper "yellow block" for SKARAB since most of our development is using CASPER toolflow. Do you know if anybody is already working on it or if there are any limitations due to the new ADC interface ? Regards, Amit On 20-Dec-17 7:15 PM, Clifford van Dyk wrote: > > Hi Amit > > Your Skarab would have been shipped with a firmware that supports DHCP > on all GbE interfaces and bootloading over 1GbE (only). It includes > support for the ADC mezzanine. You will probably need to use the > Peralex BSP tools to access and boot the Skarab over 1GbE, rather than > the CASPER toolflow. > > If you would like to work with the CASPER tools, then you will need to > overwrite the Peralex boot image with the CASPER boot image. This will > provide additional support for booting the Skarab over 40GbE, but you > will loose support for the ADC. The ADC firmware is currently provided > as HDL code only-it has yet to be ported into a CASPER yellow block. > > I will pop by the office tomorrow to provide you with a link where you > can download the Peralex BSP. > > Kind regards, > Clifford > > > On 20 Dec 2017 6:05 PM, "Amit Bansod" <[email protected] > <mailto:[email protected]>> wrote: > > Dear All, > > I am trying to boot SKARAB and the it gets stuck at "ARP ENTRY ID:0 > IP:....". Is there any way to force a static ip address or boot > via 1GbE > interface as well ? > > Many Thanks! > > Regards, > Amit > > -- > You received this message because you are subscribed to the Google > Groups "[email protected] > <mailto:[email protected]>" group. > To unsubscribe from this group and stop receiving emails from it, > send an email to [email protected] > <mailto:casper%[email protected]>. > To post to this group, send email to [email protected] > <mailto:[email protected]>. > > -- > You received this message because you are subscribed to the Google > Groups "[email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > To post to this group, send email to [email protected] > <mailto:[email protected]>. -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
