Lance. Where do you plan to use the double? I recall earlier you were talking about expanding the starboard berth. In my 1989 C-27 I already have an expandable starboard berth, but when fully deployed it is too narrow for a double (43" wide at the head and 36" at the foot), which is why I'm planning to use Lori's cross-cabin set-up.

Jeff Sheler
s/v Windsome
C27TR #6594     
Hampton, VA


At 01:06 PM 3/28/2007, you wrote:
Jeff,
 We are going to use a Double Mattress as well. On our C-22, we had a queen size and it was frankly too big. As we like to cuddle when sleeping, a double will be plenty.
 
 

Lance B. Jones _/)
Internet Account Representative
AT&T Advertising & Publishing
2247 Northlake Pkwy
Tucker, GA 30084
Direct: (678) 406-2183 Toll Free (866) 713-9515
Fax: (770) 908-6273
-----Original Message-----
From: [email protected] [ mailto:[email protected]] On Behalf Of Jeffery L. Sheler
Sent: Wednesday, March 28, 2007 1:02 PM
To: [email protected]
Subject: Re: catalina27-talk: RE: catalina27-Bed improvements

Thanks Lori. This is helpful. I'd love to see some more pics, especially of the stringers in place and a close-up of the cutouts and of the rounded(?) ends of the stringers.

FWIW, I'm thinking of using a double-size air mattress, which should fit nicely widthwise. Most are 54 inches, and I measure a 55-inch width of the narrower (port) settee. Lengthwise it may be a bit of a squeeze. Most mattresses are 74 inches, and I measure 70 inches at the short (fore) side of the new berth. But I'm thinking it should work if I keep the mattress slightly under-inflated.

Anyway, thanks again.

Jeff Sheler
s/v Windsome
C27TR #6594     
Hampton, VA



At 12:43 PM 3/28/2007, you wrote:
Jeff,
 
they were 2x4s cut down and rounded along one side to fit into the stringer notches, 5 all together, each slightly different in length to account for the curved width.  I attached a pic of how the inside looks bedless (I left the photo pretty big so you can see detail). If you look closely you can see the cutouts for the stringers with the topping strip. The wide trim strips lengthwise under each berth were replaced with thicker mahogany but level with the berth, with a removable finishing trim that fits in with dowels along the top so there is a lip for the cushions again.
 
I'm planning  to visit my boat this weekend for a fix and will take a few photos to put on my somewhat neglected website.
 
Lori T
1979 Catalina 27 #4244
"Summer Place"
Barnegat Bay, NJ
http://users.nac.net/lorrainet/home/


"Jeffery L. Sheler" <[EMAIL PROTECTED]> wrote:
Lori. What size boards did you use for stringers? How many stringers do you have? Thanks.
Jeff Sheler
s/v Windsome
C27TR #6594     
Hampton, VA




 

It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.


*****

The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential, proprietary, and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers. GA625



Reply via email to