I keep the specifics for a task otherwise I'll eventually carry off the boat to save space or weight. I carry
1. A Nicro press crimper for it's the compound leverage cable (rigging) cutter. 2. Wooden holes plugs and a mallet 3. The wrenches for a belt change & spare belts 4. A screw driver & spare impeller 5. An injector seal kit for my motor 6. Emergency tiller 7. A one hand operation cut away knife (I keep this on me at all times an practice by using everyday.) 8. A Gerber multi-tool 9. A pair of 1,000,000 candle power spots (one cordless, one 12V) 10. A hand crank LED flash light (in the cockpit so we can use the light when we board to work combo locks in the dark) 11. A wash down pump, hose, and nozzle (there's no water on our dock but we are in fresh water) 12. Shore power cord. On bigger trips 13. A mast ladder 14. A 1000 watt generator (will jump start diesel) Phil Agur s/v Wing Tip Secretary, C270 LE #184 IC27/270A MMSI 366901790 www.catalina27.org Vessel Doc# 1039809 -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Derek Atkin Sent: Saturday, November 22, 2008 7:16 AM To: [email protected] Subject: catalina27-talk: Tool reccomendations I have recently just purchased a 1979 Catalina 27. As I am putting together my list of things to buy - was curious to hear any special tool reccomendations. I assume just about everything on the boat is SAE. Aside from sockets, wrenches, screwdrives etc. Anything that I should keep on board ? Thanks Derek A.
